How to properly install and debug outdoor LED advertising screens!
Date: 2019-12-10
How to make outdoor LED advertising screens install and debug
If outdoor billboards are to be used well, installation and commissioning are indispensable. For technical construction personnel, knowing the skills of outdoor construction and maintenance of advertising screens will effectively promote the advertising and information dissemination of businesses. It is also necessary for technical construction personnel to be familiar with Specifically, there are four links in the installation of outdoor electronic billboard LED electronic display screens: site survey, equipment construction, installation, and commissioning.
First of all, we need to conduct a site survey based on the actual situation
Specifically, before the outdoor LED display is installed, parameters such as specific environment, topography, luminous radiation range, and brightness acceptance ability should be tested uniformly. In order to ensure the smooth installation of billboards, it is necessary to The commander carried out a uniform lifting scheme to ensure that the equipment could be used normally and stably. Treat different situations differently to take a more appropriate approach.
Secondly, after the specific plan is determined based on the results of the field survey, we will build the LED equipment.
For the construction of some outdoor LED billboards, it is necessary to distinguish between wall advertising screens, hanging advertising screens and roof advertising screens. During the actual installation, the crane and the hoist should be used for section lifting according to the distance and height, and at the same time, the above personnel should cooperate with each other. There is a better installation and use process for the LED advertising screens operating at height. During the construction process, safety and refined operation are the first requirements.
Once again, the setup is complete. In order to obtain the best propagation effect, we also need to debug the emission range.
Because the radiation range is different, the angle of view of the LED display is different. You must fix the outdoor LED display in accordance with the field's acceptance ability and the normal range of viewing angles to ensure that each angle can be seen from normal, bright and normal. Balanced image, subtitle information, large viewing angle and appropriate brightness can maximize the benefits.
Finally, for smooth delivery, we need to conduct follow-up inspection and maintenance
Subsequent inspections include many areas, such as LED display waterproof, heat dissipation layer, LED surface waterproof coating, rain cover on the display, heat dissipation on both sides, power supply lines, etc. These basic components and products constitute the entire stability Good graphic LED display. Of course, later technical maintenance is also very important. We need to carry out unified management and maintenance for these parts. When products are rusted, unstable and damaged, they need to be replaced in time to ensure the safe use of the entire display.